- Resized_20240628_113306.jpeg (422.65 KiB) Viewed 1717 times
2007 D40 Spain Ball joint
2007 D40 Spain Ball joint
Good afternoon all. My mechanic went to change the lower ball joint but discovered it is apparently an odd size. His vernier tells him the old spigot is 45.6 approx but can't find one bigger than 45.25. Anyone seen this before? Plate attached. Thank you
-
NavBoss
- Team Leader
- Posts: 41
- Joined: Sun Jan 22, 2023 2:38 pm
- Location: Brisbane QLD Australia
- Has thanked: 8 times
- Been thanked: 7 times
- Contact:
Re: 2007 D40 Spain Ball joint
Hi Rockwall,
Looking at your compliance plate you have a Spain Built D40 Navara. As far as I am aware there are only 2 sizes available which are 43.25mm and 45.25mm bot of which have a 22mm pin. There is a 24mm pin version but it too has a 43.25 spigot. Are you sure he measured correctly and that his verniers are accurate.
Product Link : https://navlife.com.au/product/lower-ba ... as-a-pair/
Looking at your compliance plate you have a Spain Built D40 Navara. As far as I am aware there are only 2 sizes available which are 43.25mm and 45.25mm bot of which have a 22mm pin. There is a 24mm pin version but it too has a 43.25 spigot. Are you sure he measured correctly and that his verniers are accurate.
Product Link : https://navlife.com.au/product/lower-ba ... as-a-pair/
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Login with your social network account
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute